Water quality
Smart measurement of the water quality.
The i::scan is a multi-parameter spectrometer that can be installed directly in water lines. The probe is in direct contact with the medium and is mounted on a pipe saddle. Mounting and measurement directly in the medium or in the flow fitting.
The Hawle.LIVE supplies the i::scan with power and is responsible for controlling the probe, interpreting the sensor data and transferring the data to our Hawle.MAP. The Hawle.LIVE in combination with the i::scan fits together perfectly and can be easily integrated into any water supply system.
The following parameters can be checked with the i::scan spectral probe:
- Turbidity (NTU-EPA, FTU-ISO)
- Colour
- UV254 / UVT
- Organic parameters (TOC, DOC, CSB)
- Many other combinations possible
- Plug & Measure
- UV LED based spectrometer 245 – 880nm
- Low energy consumption (1 watt)
- New light source technology
- Automatic cleaning possible
- 100 % corrosion free
- Mounting and measurement directly in the medium or in the flow-through fitting
- Direct mounting in the pressure line possible
- Hawle.MAP integration
TURBIDITYcaused by small particles in the water. These are undissolved, inorganic minerals or organic particles. Turbidity is therefore often an indicator of impurities in the water.
COLOUR: Drinking water should be colourless.
Yellow to yellow-brown: humic substances
Yellow to brown: water containing iron and manganese
Blue: corpreous water
UV254is a simple indicator of organics in the water
TOCindicates the sum of the total organic carbon collected in the water. TOC describes organic contaminants in a water system and is used in quality control and cleaning validation.
DOCis the dissolved organic carbon content
measured by turbidity compensation.
- Measurement interval: 2 minutes (standard), individually adjustable
- Each measured value is recorded and temporarily stored. If an alarm threshold is exceeded, an immediate notification is given.
- Transmission interval: the saved data is transmitted to the platform every 12 hours (standard) and immediately in the event of an alarm.
Application areas
- Monitoring drinking water quality
- Monitoring of sources, pure water
- Process optimisation
- Intelligent sensor networks
- Flocculant dosing
- Monitoring the purification of wastewater treatment plants
i::scan installed directly in the pressure line.
The i::scan can be mounted in the pressure line without interrupting the water flow.
Subject to changes